631-588-8820
Fax: 631-588-8953
2059 Ninth Avenue
Ronkonkoma, NY 11779
CARTRIDGE HEATERS
OMEGA ULTRAWATT
meets the most demanding requirements for reliable, high temperature service
1. PTFE or high density lava locks MgO in place and resists contamination between lead wire and sheath
2. MgO tightly compacted due to swaging.
3. Evenly spaced highest quality resistance wire for uniform heat distribution
4. Welded in place end disc
5. Heavy wall stainless or incoloy sheath for maximum thermal conductivity and corrosion resistance
6. The standard 10" high temperature lead consists of a 1-1/2" solid conductor insulated with durable Fiberglass...plus 8-1/2" insulated flexible leads
  • Fast Heating
  • Long Reliable Service Life
  • Efficient Operation
  • Wide Range of Options
 ULTRAWATT SPECIFICATIONS
Nominal Dia. 1/4 3/8 1/2 5/8 3/4
Actual Dia. .246 .371 .496 .621 .746
Max. Volts 250 250 277 500 500
Max. Amps 4.2 6.3 10.5 22 22
Min. Wattage Consult Omega
Wattage Tolerance +5% -10%
Length
Tolerance		 Nominal tolerance is ±2%
with a minimum of ±3/32
Camber Tolerance ±.018 per foot of length
Watt Density See chart
High Temperature Ultrawatt Heaters Swaged Construction
High Watt Density
-Higher temperature (up to 1400 deg. F)
-Maximum heat transfer.
-Rugged design resists shock, vibration and gives longer life than standard construction.
OMEGA CARTRIDGE HEATER GUIDE

A - STANDARD LEADS
Leads 10" standard crimp connected externally. Insulated with fiberglass sleeve.
H - NPT PIPE FITTING
¼" Dia. Requires 1/8-27 NPT • ½" Dia. Required 3/8-18 NPT
5/8" Dia. Requires ½- 14 NPT • 3/8" Dia. Requires ¼-18 NPT
¾" Dia. Requires ¾-14 NPT

B - ALL FLEXIBLE LEADS
Leads 10" standard internally connected.
J - NPT PIPE FITTING WITH PTFE SEALS
Requires 1" cold end. Cannot be applied to stock. ULTRAWATT only.

C - PTFE SEAL & LEADS
Requires 1" cold section on lead end. Available in ULTRAWATT only.
K - FLANGE FITTING
1/16" thick x ½" dia. With 2 no. 10 mounting holes on 1-1/8" centers.

D - FLEXIBLE CONDUIT
12" flexible steel conduit over 14" leads.
L - RIGHT ANGLE CONDUIT WITH STD. COPPER ELBOW
12" flexible conduit over 14" leads.

E - RIGHT ANGLE CONDUIT
12" flexible steel conduit over 14" leads.
M - INTERNAL THERMOCOUPLE
Leads 10" std. Thermocouple iron-constanton ste. Cannot be applied to stock.

F - RIGHT ANGLE LEADS
Metal capped end disc require 5/8" cold end on top. Cannot be applied to stock.
N - STRAIGHT CONDUIT WITH STD. COPPER COUPLER
12" flexible conduit over 14" leads.

G - CERAMIC BEAD OVER BARE LEADS
6 beads over 6-1/2" leads.
P - BRAID PROTECTION LEAD
12" braid over 14" leads.
Check our STOCK LIST
1/4  DIA 3/8  DIA 1/2 DIA 5/8 DIA 3/4 DIA
CERAMIC  BANDS MICA  BANDS OTHER PRODUCTS
Standard Standard/Advantage Thin Cartridge Heaters
Insulation Plus

STRIP

Cast In Heaters
Super Insulation Plus Mica Controls
The Ultra Thin Line Ceramic Accessories
Air Cooled Finned OMEGA HOME PAGE
Ceramic Roller Heaters NEW! Industrial Component Heater NEW! Space Heating Equipment